What You Need to Know About Motorola LCD Monitors
Colors
Colors vary according to the intensity of each sub-pixel, and they shift with the viewing angle as well. At a moderate 30 degree viewing angle Red and Green shift the most, while Blue shifts the least, and all are well below the Just Noticeable Color Difference (JNCD) standard. Motorola has two color modes, the “Normal” mode is calibrated to the sRGB color space that most smartphone content is authored for, while the “Vibrant” mode uses a wider gamut that Motorola lcd produces brighter colors that some users might find pleasing. The Motorola displays are very accurate, even when using the Vibrant mode.
Contrast
The maximum contrast available on Motorola lcd depends on the display’s backlight setting and the ambient light sensor. Both modify the manual user backlight power setting and control the intensity of the resulting image. This saves power and improves visual comfort. Dynamic Contrast does so by adjusting the brightness of Red, Green and Blue images so that their sum is equal to White. This increases the perceived contrast and allows the screen to remain powered down at lower average picture levels – this cuts power consumption significantly.
The Motorola lcd uses an IPS LCD which is more color accurate than the OLED screens found on the Samsung galaxy devices and it has a higher refresh rate so it should be smoother when scrolling web pages or watching video. However the maximum measured contrast ratio is not particularly impressive for an IPS LCD.
Brightness
Motorola lcd is available in different brightness levels that can be adjusted to suit your preferences and the lighting conditions. You can change the brightness by swiping your finger downward from the top of the screen and dragging it to the left or right or by going to settings menu – display & font – Brightness. You can also select Auto brightness to let the phone decide which setting is the best for you. The brightness of the display can also be affected by the viewing angle. When you are viewing the image within the ideal viewing angle, the display will be bright and clear.
Viewing Angles
A screen’s viewing angle determines whether or not the display can be viewed from different angles without looking blurry. It is important to look for a monitor with wide viewing angles, because most of the time you will be using your screen from different positions.
A standard TN LCD has Motorola lcd a fairly small viewing angle, but this can be improved by adding an extra-wide polarizer film or using a VA or IPS matrix. This will also help to increase the contrast ratio, which is important for a monitor.
The colors of the display will shift with viewing angle, but this is less of a problem with modern displays that use VA or IPS technology. This is because these technologies have a much wider color gamut than standard TN LCDs, and they can therefore display more colors at a given brightness.
Colors generally shift with viewing angle because the bright LCD sub-pixels decrease in brightness with the viewing angle, and the dim sub-pixels increase in brightness. This causes a shift in the Intensity Scale, which is the basis for the Picture Contrast.
However, these changes are usually very small and do not affect the overall appearance of the image on the screen. Moreover, they are usually only noticeable when the viewing angle is very extreme. Therefore, most people don’t really care about the viewing angle of a Motorola lcd.
